There are already many of us who train with watts in cycling, because more and more brands are appearing, the cost is decreasing season by season and there is a lot of information on how to use them properly, which is a great help in improving performance.

Even the language of watts is something colloquial, not only specialists are able to talk about FTP, many of the possibilities of watt control software and everything related to it, TSS, CTL, etc. you can learn about in another post.

But few people know that watts are also measurable during a race and with very precise systems, as demonstrated in recent research.

Software that until recently was only used to analyze cycling data is being upgraded to allow separate analysis of watts from running training, which may be a new era of training for runners as it has already been in the world of cycling.

Watt training has the following advantages over traditional HR or GPS systems:

  • The intensity of training or competition can be controlled with great precision regardless of the slope (except for very steep slopes).
  • This great precision in pacing allows us to control the pace that we must take in any competition to achieve the best performance while being very regular(pacing) and it is from my point of view what has allowed many runners to improve their performance.
  • We will be able to monitor parameters related to running biomechanics in each training session and compare with ourselves or even with other runners to know our weak points.

DO YOU TRAIN THE SAME WITH WATTS IN CYCLING AND RUNNING?

The big failure of those who start training with running watts after using it in cycling is to use the same % to adjust the zones, as even some software offers the identical percentages from cycling.

We are going to work on the proposal made by Dr. Skiba, author of numerous publications and collaborator of the Nike breaking 2 project, but based on Jack Daniels’ training rhythms that we saw in another post.

The watts margin in running is much smaller and therefore despite having the same work zones, the % of FTP for each of them, in the case of running is called Critical Power (CP) or rFTP (running Functional Threshold Power). In order to start using them, it is essential to use this graph and compare it with the zones used in cycling, where 100% is the value of the FTP or CP in running.

Let’s review each of these areas:

  • Active recovery: Increased circulation to facilitate recovery processes, rest without inactivity. It is used for warm-ups or very comfortable runs.
  • 2. Aerobic endurance: Improvement of the resistance of slow contraction fibers, being the duration the most important aspect of this level. Example: 90min of continuous running at 80-82% of the CP.
  • Tempo: Race pace training for long duration events (marathon, half Ironman, etc.). Example: 90min training with two sets of 30min at 92% of the CP.
  • 4. Threshold: Maximizes metabolic adaptations at a muscular level, being one of the most important levels for performance in endurance sports. Example: 4x2000m at 100% of the CP with recovery of 90sg.
  • 5. VO2max: Maximizes cardiovascular adaptations and improves running economy. Example: 5x1000m at 115% of CP with 2-3min of active recovery.
  • 6. Anaerobic capacity: maximizes anaerobic capacity and is considered to induce improvements in running economy. Example: 6x400m at 130% of CP with 2-3 min of active recovery.
  • 7. Neuromuscular power: This is short, high intensity work that works the musculo-articular system more than the metabolic system, sprints, polymetric exercises… There is great evidence of improvements in running economy.

DIFFERENT OPTIONS FOR MEASURING WATTS DURING A RACE

RPM2:

In 2014 a system was invented to measure power by means of cycling insoles, although this system could also be used in running. It is the most expensive system, with an approximate cost is about 500 euros, but the most versatile, since we can use it also for cycling. I do not know anyone who has it, nor the reliability it offers, but it seems to offer interesting data.

  • Advantages: A great deal of information in addition to watts, including podiatric information (imbalances between left and right foot, ankle dorsiflexion, pressure zones, etc.).
  • Disadvantages: In addition to being the option with the highest price, the need to load the insoles for each training session and the wear and tear of the insole if we use it a lot can be a big handicap.

STRYD

Only a few months later the star brand of the moment appears on the market. It began developing its system with a band placed on the trunk, but after a while it discarded this idea (2016) and passed it to a simple and very light sensor (only 20gr) placed in the shoe.

By means of a complex algorithm that takes into account acceleration, cadence, inclination, impact on the ground, contact time, etc., it sends the information to a monitor (it is compatible with many brands) or to the cell phone via Bluetooth or the ANT+ system. One of the main criticisms of this system has been that it does not take into account external factors such as wind, but in the latest version a sensor has been included to correct this.

  • Advantages: It is the most convenient and easy to use system, compatible with the vast majority of sports monitors. The battery life is about 20h and also has an internal memory (9-10h) that allows you to record multiple data without the need for any reader and its own software to analyze the data.
  • Disadvantages: The big handicap is the type of terrain, since on steep slopes watts are lost and an adaptation is necessary (different watts references in relatively flat areas to others with many slopes). Also the surface of the terrain, the softer it is the less watts we can develop (beach sand for example).

SHFT

It is a European system that requires two sensors, one in the shoe and another in the form of a chest strap. In addition to measuring the power during the race it analyzes more parameters and is even able to analyze the running technique instantly while running giving advice using a specific app.

Advantages: It is the most economical system (less than 200 euros). Good option for beginners because of the constant feedback to improve running position and technique.

Disadvantages: Watt control is not the priority objective of this system and the reliability of its data is not very accomplished. It is necessary to train with the cell phone to be able to visualize and record with its own App.

RUNSCRIBE

This is a more specialized system for biomechanical running assessment than a simple watts sensor. The system is very similar to that of Stryd, but uses two sensors, one in each shoe that allows independent assessment of the action of each leg.

  • Advantages: Large amount of information, very useful in the assessment of running biomechanics and continuous analysis of asymmetries.
  • Disadvantages: High price (400-500 euros) and more complex system for an average and non-specialized user. Heavier system (159gr) than Stryd (20gr).

WHICH SYSTEM TO CHOOSE?

Any of these systems will be a great help to runners, but each has its own peculiarities.

The SHFT system is ideal for novice runners as it will allow them to improve much faster due to this help in the technique in each of the workouts and with real-time information. In this it is possibly the winner, since it is also the most economical.

RunScribe and RPM2 are the most expensive for the amount of information they offer. They would only be recommended if you are a specialist in running biomechanics or have specific needs in this field.

The middle ground I think is with Stryd for the moderate price (200-240 euros), high reliability and comfort. In addition, its Powercenter platform includes a lot of information to analyze the training in a simple way, being a good training controller without the need to use more complex software.

Another great advantage is that it is compatible with many of the current monitors (Garmin, Suunto, Polar, etc.) and even the possibility of not needing any element to record the training (thanks to its internal memory).

If you have decided to start training with running watts and it is your first experience in monitoring this type of training, I recommend using Stryd and Powercenter. It provides information about our training and almost automatically with important values such as our Critical Power (absolute watts and relative to weight) and training zones (in this case it simplifies it with only 5 zones).

It also includes a power curve that records our best times in watts for each specific time, and we can check on what date we achieved it.

Thanks to this system you will be able to start using the training load control through the RSS (running stress score), assigning to each session a time-based quantification with respect to the intensity on the Critical Power (CP) and a daily, weekly, monthly, etc. follow-up.

RSS = 100 x training duration x (Power/CP)^K

Thisweekly load will be reflected and with a simple glance we will be able to control the need to increase or decrease our running training.

Don’t get left behind and improve your performance in a simple way, it’s easier than it seems. In a few years almost everyone will be talking about the speed in w/kg at which you are able to run a 10km or a marathon and compare yourself with the best as it already happens in cycling.

In another post we will analyze the biomechanical information it provides in each of the workouts.