In these moments of much free time and without the possibility of training outdoors we are giving a good review of the feats of the best stages in the history of cycling. In all of them there is something in common, when in the rest of the competitors fatigue appears, the champions maintain their performance and apparently in them there is no fatigue.
One of these mythical races was the 2018 World Road Cycling Cross Country Championships in Innsbruck, considered one of the toughest in history with almost 260km and 4670m of positive elevation gain. The course included 85km of liaison on a terrain full of steep climbs before 7 laps of a 24km circuit with the demanding climb to Igls and in the last of them connected with a final section that included a hard climb (ramps up to 28%) just 9km from the finish line.
The winner was Alejandro Valverde and in this link you can see most of the records obtained that day. As for example the data of the last lap which was the most demanding with an average power of 288w (section of the final climb to finish 326w) and with a % of time above the anaerobic threshold of almost 30%.

Unfortunately we do not have exact data on its FTP power and several other parameters that we will miss, but it is still very interesting.
We do have data from Michael Woods, third classified with a normalized power of 273w during the whole competition. The average power of the last climb in just over 13min was 346w, being the highest of all. But the final climb is the most striking with an average of 412w (6.46w/kg) in 9min.
We can also see how in the final sprint of about 300m he achieved an average power of 802w (12.53w/kg) and a peak of 1,002w. Although we do not know the real value that Alejandro achieved in this final sprint we can see that he reached a peak of 284% of his FTP and an average of 154% in this final part. If we compare with Woods and also take into account that Alejandro was in the lead during the whole sprint we are sure that the value was higher than that of his rival.

If you are a good level cyclist, the data of the final sprint may not be very exaggerated, you may even have exceeded them on occasion. But we must think that they were achieved after almost 7 hours of competition and that in the last lap almost 30% of that time was in the anaerobic zone. That is precisely the difference between good cyclists and the best cyclists in the world.
Nowadays, data can be monitored exhaustively and with software such as WKO it is possible to check the difference between the best records obtained by the cyclist and the records achieved under certain conditions of fatigue.
I guess we all understand that it is not the same to do a sprint in the first 30min of competition that after 7h possibly the power achieved in the first sprint of 30sg will not be the same as in the tenth despite having had adequate recovery between them.
This concept can often be overlooked, but my experience has shown me that one of the biggest differences between professional cyclists and good amateur cyclists is precisely this resistance to fatigue, as often the values in w/kg at rest are very similar.
In competitions that are not very demanding and of short duration, many cyclists can win, but as the intensity and duration of the race increases, the candidates for victory are reduced and in this case resistance to fatigue is the limitation for many.
In these cases you can understand why two cyclists with a very similar FTP have very different results. Let’s understand it better with an example
The cyclist in the first graph and the one in the second have very similar peak power. The one in the first graph has a better mark in 1min of 654w and the second one of only 573w (14% better). If we keep these results we consider that the rider in the first graph is the better cyclist.
However, as time goes by, the results of the second graph are better.
In 5min the first graph gets 392w and in the second 416w (5.77% better the second cyclist).
In 20min the first graph gets 325w and in the second 365w (10.96% better the second cyclist).


But the differences are even greater if we check what happens after having done a 3000 Kj work. This is represented in the green curve and you can see the big difference between the first cyclist, much higher fatigue, than the second one with a very good fatigue index showing that he is a high level cyclist.
In 5min the first graph achieves 295w and in the second 386w (23.68%).
In 20min the first graph achieves 226w and in the second 291w (22.33%).
Even in the best 1min record the second rider (525w) now outperforms the first (433) by 17.53%.
The former would need a lot of work to be able to win a world championship like Alejandro Valverde did, but the latter is doing a much better job in this regard and would be closer to achieving it.
In this other example we can see the difference between two seasons for the same rider. In which the peak watts are almost identical in 1min (2019 with 514w and 2018 with 517w), 5min (2019 with 377w and 2018 with 378w) and in 20min (2019 with 328 and 2018 with 331w). However, the differences in competition results made it clear and 2018 was a much better season than 2019. This big difference was found in the fatigue endurance I had in 2018 versus the less worked 2019.
| Seasons | 2018 | 2019 | Difference |
| Peak 5min | 378w | 377w | – 0,66% |
| After 3000 kj | 343w | 277w | -19,24% |
| Peak 20min | 331w | 328w | -0,90% |
| After 3000 kj | 186w | 167w | -10,21% |

How can this capability be improved?
There are really two objectives in this regard:
– Anaerobic fatigue resistance
– Resistance to aerobic fatigue
In both cases, this type of training should be included in the planning.
It is all very well to increase the maximum w/kg in 5sg or 30sg, but if we forget to maintain a good average power during several sprints of 30sg it is very likely that we will not achieve good results in competition, since before reaching the final sprint we have had to endure a lot of previous work and fatigue will not allow us to offer the full potential we show in training.
From my point of view, the beginning of this ability should be worked from the base or general preparatory period.
Recommendations to increase fatigue resistance
1. In this work that we can define as deep base a very good option is to perform high intensity training in energy deficiencies. A good example can be a high intensity series in VO2max zone or higher after several hours of training (background session) or in low carb sessions.
2. Perform training with previous muscle fatigue. After a good previous strength session, even with electrostimulation (Compex), short but high intensity workouts are a great stimulus. Another good option to do on a roller is a combination of high intensity series with transitions to strength exercises.

3. Improve anaerobic work capacity (W’) :
The proposal is to work in broken sets in high intensity zone to improve muscle re-oxygenation and energy resynthesis (ATP and Phosphocreatine), with great benefits. In this case there are two possibilities
a. Improve time at VO2max: This proposal was made many years ago and is known as the Billat method in which you work at VO2max watts intensity and take short breaks in which recovery is incomplete, but the effects of oxygen deficit are maintained longer than in continuous sets
Example 3 blocks of 10min doing 40sg at 400w (wVO2max) and 20sg at 50% FTP
b. Improvement of ATP and PCr resynthesis: The work is similar, but the objective is very different, since in the previous case the main limitation was oxygen and in this case being anaerobic work this aspect is unimportant. To perform this work the intensity must be higher and the recoveries also to be able to maintain an intensity that is really useful.
Example: 4 blocks of 4sprints of 15sg at +1000w recovering 1min.
If you are a cyclist who has no problem to be in the lead during the first kilometers or at the beginning of passes, but your performance decreases a lot if the intensity is maintained over time or you feel that it is impossible to maintain the watts you could carry several kilometers before you should work with this type of training.
Being a better cyclist means being able to tolerate fatigue better, and for that you have to do fatigue training as part of your planning. It’s hard, but the results are worth it.